Can a Rife machine cure cancer?

[Hans Gimpelj]

Hi everyone,

It has been my understanding since I started this research that the frequency generators are the basic equipment used for the destruction of the cells causing the problem and the use of natural suppliments (including water) are used to flush the toxins out of the body and regenerate the immune system.

What I am having a little difficulty with is why so many members of this Forum own/use more than one frequency generator
Have they bought cheaper (low power) ones to begin with only to find out that they did not perform as expected, therefore upgrading to better units, or is it a general lack of faith in any one of these devices that has caused them to buy multiple units so that they can try different ones on alternating days of treatment

Kind regards

[Annie Andrey]

Oh Hans, you make me smile!
One area where Electrotherapy isn't (in my opinion) very effective, is treating 'addiction'.
When my parents moved home about a year ago, my retired Med. Eng Dad could've opened his own online "Tools For Healing" store with what he'd accumulated over the past 50yrs.
@nnie
PS: Forgive me if I'm wrong ... but I think it's mostly "boys and their toys!"
Oh! After all those years and all those 'toys', by the time I got hooked on ONE Frequency Generator and a couple of zappers (I loan these out for folk to use between Freq. treatments, because I believe that works best), Dad mentioned that he'd learned, that no matter which Electrotherapy device or 'alternative' healing method one used, the KEY INGREDIENT was FAITH / BELIEF. If one (or when helping another, both parties) truly believed in the eventual efficacy of 'whatever' method was being used, the outcome would most often, in his experience result in success.
It's the "Law of Attraction" ... like attracts like!

[Hans Gimpelj]

Hi Annie

The use of frequency generators for addiction has never crossed my mind, thus I havn't done any research about it, for now I will just take you word on that issue Annie.

I am an avid believer in the use of audio frequenies/harmonics to heal the body by destroying the bad cells and balancing the immune system, I know that it CAN be done (using a powerfully suficient device) and the only question that remains is the correct frequency selection/s for any particular problem.

Herein lies the biggest hurdle for all of us. So far I must have compiled one of the largest libraries of frequencies on my PC known to mankind, (at least in my own mind) . Eventually I will correlate them all into my own database but for now I am still collecting more frequencies from various scources. I don't know if I will achieve anything by doing this but I hope to at least condense/reduce and cross-reference sufficient data to logically come up with some 'basic' frequencies to work with.

Kind regards

[Annie Andrey]

Hans The way I look at 'it', is that very often, wo/man in general tends to complicate things for her/himself ... often turning something very basic into a rocket science unnecessarily ... yet mostly only through enthusiasm and an innate sense of perfection and/or personal fulfilment.

Let's not forget though, that the most frequently used device for the LONGEST period of time, and WITH amazing results, was the Bio Solutions (now available under a vast array of different brand names) pre-programmed, CODED pad frequency generator. The majority couldn't decipher actual frequencies anyway, and cared LESS about these anyway, instead, just getting down to using these machines by selecting whatever sequence the originator had pre-programmed and listed on her recommended treatment list. THIS WORKED!

Then all of us 'smarty pants' came along ... and so, this therapy appears to become more 'n more complicated with time and more 'smarty pants' constantly coming on board.

If one only had a bicycle to get from A to B, one would naturally take the quickest, easiest route ... but when one has a car, the distance is often MUCH greater with many more obstacles en route.

ENJOY! ENJOY! No matter which route you choose to take dear Hans. Please keep what you have on file, and try to avoid doing what I did, by printing everything out ... I have a pile so high, and NEVER touch it.

Blessings,
@nnie

[Hans Gimpelj]

Hi Annie

I fully concur with you views and the last thing that I wish to do is to further complicate the whole issues of frequencies, in fact, quite the opposite, I am trying to simplify the whole mess of available frequencies (at least for my Mum's problem). Of course I will go with the recomendations from the manual (GB-4000) to begin with. This also brings me to another point. Does anyone know who the manufacturers are of the GB-4000 this info should be on the compliance plate at the back of or under the casing.

Kind regards

[Annie Andrey]

Hans Having recently become a distributor of the GB4000, I, plus any other distributors, most as far as I know, also forum members (but scarce) surely know who the manufacturer is. It took me MANY months to find out, as those I approached initially, claimed to be 'the' manufacturer (maybe worded slightly differently though) themselves!
This isn't important to know though, as long as your supplier gives you the service he/she promised you. Manufacturers don't want to be bothered with clients' zillion questions ... that's why they pay others to perform this essential service on their behalf.

@nnie
PS: Please don't ask me though, 'cause I'm not telling.

[Annie Andrey]

Do please read the articles posted at: http://www.rifeforum.com/forum/showt...=6469#post6469
especially the first, Devvy Kidd's.
Sadly, Australia (like MANY other UN countries) is fast on the heels of the FDA.
The PharMafia appear to indulge in multiple bed partners ...
Hopefully they'll practice some degree of racism though, and leave us in Africa alone ... or better still, that our leaders continue to see right through their evil plans, and have the strength to fight them off for the sake and wellbeing of their people.

Bye,
@

PS: We need more people like John Perkins http://www.johnperkins.org -
Dr. Bill, Devvy Kidd, Dr. Mercola, Jon Barron, Gary Null etc. etc. to continue to so courageously and relentlessly spread the TRUTH. They all also deserve our support.

[Rob Cassteele]

Hi everyone,

It has been my understanding since I started this research that the frequency generators are the basic equipment used for the destruction of the cells causing the problem and the use of natural suppliments (including water) are used to flush the toxins out of the body and regenerate the immune system.

What I am having a little difficulty with is why so many members of this Forum own/use more than one frequency generator
Have they bought cheaper (low power) ones to begin with only to find out that they did not perform as expected, therefore upgrading to better units, or is it a general lack of faith in any one of these devices that has caused them to buy multiple units so that they can try different ones on alternating days of treatment

Kind regards

I first learned from electro medicine in 1993, thanks to Marjory Phillips, that was the Hulda Clark way.
Since I was unable to find the right electronical components to build my own zapper, I bought a frequency generator because H. Clark told in her books that would be a substitute for a zapper.
in 1994 I first learned about Rife, and in 1997 I first bought a machine programmed for Rife and Clark frequencies.
I learned the difference in Rife, Hoyland and Crane frequencies in 2003, the year we bought a GB4000.
The Rife Hall machine we bought in 1999, was bought more as a collectors item instead of a machine for use.
I made the zapper in 1994, but by than we notiuced already that the effect of the function generator was better than the lower power of the zapper.
Whit the function generator we pretty much had the same results as H. Clark tell in her books.
Our curiosity for the real Rife frequencies came later, but the results we have so far using a GB4000 next to a Global Wellness clone is obvious.
It looks like the effect of the GB4000 using the carrier wave has better results on most conditions than without the use of a carrier wave.
The signal of the GW clone is in fact not able to penetrate cells, and the signal of a radio wave does.
Because not all people have the money to buy a GW or GB my advice will be, make your own zapper, in the end it has remarkable results, but in all cases you have to stop poluting yourself, or it will not work. This is something that Hulda Clark also found out
We bought the GB4000 to prove for ourselves that Rife was right and that he was no evil magisian.
I can not prove what I do work, I have no microscope, but sometimes you just have to believe others like Raymond Rife and John Bedini like I did.
The results speak for them, but I do also have no succes at all. I think in that cases the frequencies may be wrong, or the people you try to help do not change any of their livestyle.

Rob

[Hans Gimpelj]

Hi Rob,

Ok, I can now understand your situation. It all makes good sense but I would like to hear from some other members as to why they have so many machines, could be though, that they are all in the same situation as you.

Anyhow you mentioned that cost was a large factor for some, there is a completely free PC-operated Frequency Generator, complete with list of ailments, explanations and frequencies all in the program. You just select the ailment from the list (hundreds) and the program sets itself up. It is fully automatic or programable, you can add/subtract frequencies, change the run time on any one or more frequencies, change wave types etc.
The only thing that you need is an amplifier and contact or ray tube. It recomends that you use asuitable amplifier that can reach the higher RF mode, it also has a RF clipping mode, starting from 20MHz you can lower it in stages to suit your amplifier. It mentions a suitable list of amplifiers, the GB-4000 is not on the list but the list is so far incomplete.

If you wish to check it out, here is the link.

http://www.heal-me.com.au/

Select FreX from the left-hand pane then scroll down on the right to access the download. I downloaded it last night and played around with it for a while just using my PC speakers as I do not have my GB-4000 yet.

The first thing that you will want to do when you open the program, is go to the button, bottom left of screen "view buffer" and change the setting to clear after selection, everything becomes much easier then.


Kind regards

[Rob Cassteele]

I already tried frex and a dozen other software generators.
Without amplifier and wave corrector it seem useless. I have not seen any effect from pc generated frequencies.
Most have to work with square waves, and limited to the audio range, this make them only suitable for the less effective Crane frequencies.

Rob

I think a GB4000 even with amplifier is not strong enough to use a gas tube or bulb.
It is meant as a contact pad device, and for that the amplifier gives enough power, because there is minimal loss of power if it is directly aplied to the body.

[Hans Gimpelj]

Hi Rob.

I did mention that you would also need an amplifier plus other attachments to use the PC version Generator.

An example would be that someone trying to save a few dollars could buy the SR-4 10 watt Amplifier alone(the one that you buy with the GB-4000) and the other attachments to basically create yor own version of the complete GB-4000 using the FreX for the programming, just a thought

Kind regards

PS: I have just sent a bank transfer today for the GB-4000, SR-4, and attachments. My wallet is now a few thousand dollars lighter I also included the IRx Photon Wand LED light for topical (first aid) treatments in my order.


Thanks heaps to all of you that have contributed to my research, either directly or through your previous posts

[Hans Gimpelj]

Hi Annie,

Real cute Avarta

Kind regards

[Annie Andrey]

Thanks Hans!
BTW: That new look was achieved using my Microcurrent Facelifting machine and not my Freq. Generator.
@