Important Considerations
.
We like using electrode pads as outlined in Blast It! Book 2. However,
if you are experimenting with bare electrodes (which is not recommended), and if you decide to cover
them with damp cloths or sponges, be sure to use separate cloths for each electrode. If this is not done,
and one cloth is placed over both electrodes, the frequency will pass directly from one electrode to the
other through the damp cloth or sponge, and bypass entirely the tissue that is the intended target of the
frequency.
This same principle applies when using pans of Epsom Salt water, using either the recommended
electrodes in Book 2 or bare electrodes. Do not place both electrodes in the same pan of salt water. If
both electrodes are placed in the same pan of salt water, you are shorting the electrodes through the
Epsom Salt water, and the frequency will pass through the water, and not through the intended tissue.
Do not touch bare metal electrodes together while the frequency is turned on, or you risk damaging
your equipment.
Many experimenters do not realize that it may take 60 to 90 days to reach most or all of the
targeted microorganisms in the case of chronic infections with an experimental electrode system.
If more information on pad placement is desired, refer to any literature regarding electrode
placement of galvanic stimulators. (From Blast It.)
The basic time used is 5 Minutes, but in some cases 30 minutes to over 1 hour are mentioned. Using a Zapper, every day use is recommended, untill real tests in a hospital (blood tests etc.) show you are free from the parasites you treat for.
Rob